install the appropriate cut floor10, Yin angle plastic skirting tiles, the first two symmetrical composition of wood pressed on the inside of the corner with a plastic plate, and then take out a piece of wood, the plastic plate turning overlap,draw the cutting line, try to install the appropriate cut, then the level of 45 degrees at the intersection of the rabbet welding, as Yin angle parts, and welding or bonding. 11, plastic plate joints should be treated with groove. When bonding, the groove is made into the same direction and the overlap width is not less than 30mm;when welding, the groove is made of V shaped groove; when the slope angle is beta: the thickness of the plate is 10 ~ 20mm, the thickness of the plate is 85 =65 to 75 =75, and the thickness is from 2 to 8mm. In the thick,winston patio furniture
uses of lumbering products
manufactured home thin wood wpc panel
4 x 8 sheets outdoor decking